Quick answer: The Silage Grab 1.5m is designed for dairy, beef and sheep farmers and feed contractors. It can help because it holds loose material more securely than an open bucket and can reduce spill and rehandling. MultiCat should confirm the exact machine, hydraulic and working specifications for your job before purchase.
What is the Silage Grab 1.5m?
The Silage Grab 1.5m is an attachment planned for the MultiCat LX100. It gives owners another way to use one compact loader across changing work rather than bringing in a separate machine for every task.
A lower bucket or fork section enters the material while a hydraulic top clamp closes to retain loose silage during lifting and transport.
The result is a setup aimed at practical work in New Zealand farms, yards, landscaping projects and worksites, provided the attachment is matched correctly to the carrier and conditions.
Where can it help?
This guide is most relevant for the following types of work:
- Removing feed from a stack.
- Loading mixer wagons or feed carts and distributing loose feed.
Actual productivity depends on material density or vegetation, working width, travel speed, surface conditions, access and operator technique. A demonstration using work similar to your own is the best way to judge fit.
How it works in practice
A lower bucket or fork section enters the material while a hydraulic top clamp closes to retain loose silage during lifting and transport.
Before starting, the operator connects the attachment using the approved hitch and hydraulic procedure, completes the required checks and confirms that people are clear of the operating area. During work, the attachment should remain within the machine's approved operating envelope and be carried in the specified travel position.
How this can help your operation
Holds loose material more securely than an open bucket and can reduce spill and rehandling.
- More use from one machine: change attachments as the work changes across the day or season.
- Less manual handling: mechanise suitable lifting, moving, cutting, digging or finishing tasks.
- Better job matching: choose a tool shaped for the material instead of trying to make a general bucket or forks do every job.
- Local buying support: discuss compatibility, delivery, setup and demonstrations with MultiCat NZ.
How to choose the correct setup
Start with the job, not only the attachment name. Give MultiCat enough information to match the attachment to the machine and working conditions.
- Describe the job: explain the material, approximate size or weight, frequency of use and result you need.
- Confirm the machine: provide the exact MultiCat model so the hitch, hydraulic service and operating limits can be checked.
- Explain the site: include access width, ground conditions, slopes, visibility restrictions and nearby workers or structures.
Before ordering, confirm the attachment dimensions, attachment weight, machine compatibility, hydraulic requirements and applicable operating limits with MultiCat. The machine and attachment manuals remain the final authority.
Safe-use essentials
This article is a buyer guide, not an operating manual. Operators should be trained and follow the current MultiCat machine manual, the attachment manual and site-specific procedures.
- Inspect the attachment, hitch, retaining pins, hoses, couplers, guards and wear parts before work.
- Keep people outside the operating and discharge area.
- Travel at a speed suitable for the surface, visibility, load and attachment.
- Lower and isolate equipment before adjustment, clearing, maintenance or hose work, and manage stored hydraulic energy.
- Stop if the attachment behaves unexpectedly, visibility is inadequate or the job exceeds the confirmed limits.
Frequently asked questions
How is a silage grab different from a grapple bucket?
This attachment is most relevant when the work includes removing feed from a stack, loading mixer wagons or feed carts and distributing loose feed. The best choice still depends on the material, site access, ground conditions and the LX100 operating limits.
What capacity is realistic?
Use the machine and attachment documentation as the final authority. Before ordering, ask MultiCat to confirm the attachment dimensions, operating limits, attachment weight and hydraulic requirements, and explain exactly how and where the attachment will be used.
How can a clean face be maintained?
Start with a trained operator, a pre-start inspection, a correctly secured attachment and a clear exclusion zone. Keep the load or attachment in the approved travel position and follow the current manuals and site risk controls.
Is this the right attachment for your job?
Give MultiCat your machine model, material, site conditions and required result. The team can confirm compatibility and recommend the correct setup.
View the Silage Grab 1.5m
