Quick answer: The Hydraulic Break Hammer 35mm is designed for landscapers, builders, farms and small civil or demolition crews. It can help because it adds targeted breaking capability without a separate dedicated carrier for occasional jobs. MultiCat should confirm the exact machine, hydraulic and working specifications for your job before purchase.
What is the Hydraulic Break Hammer 35mm?
The Hydraulic Break Hammer 35mm is an attachment planned for the MultiCat LX100. It gives owners another way to use one compact loader across changing work rather than bringing in a separate machine for every task.
Hydraulic pressure cycles an internal impact mechanism that drives the tool into suitable concrete, rock or hard material.
The result is a setup aimed at practical work in New Zealand farms, yards, landscaping projects and worksites, provided the attachment is matched correctly to the carrier and conditions.
Where can it help?
This guide is most relevant for the following types of work:
- Breaking small concrete areas.
- Hard landscaping material and selected rock or post-footing work.
Actual productivity depends on material density or vegetation, working width, travel speed, surface conditions, access and operator technique. A demonstration using work similar to your own is the best way to judge fit.
How it works in practice
Hydraulic pressure cycles an internal impact mechanism that drives the tool into suitable concrete, rock or hard material.
Before starting, the operator connects the attachment using the approved hitch and hydraulic procedure, completes the required checks and confirms that people are clear of the operating area. During work, the attachment should remain within the machine's approved operating envelope and be carried in the specified travel position.
How this can help your operation
Adds targeted breaking capability without a separate dedicated carrier for occasional jobs.
- More use from one machine: change attachments as the work changes across the day or season.
- Less manual handling: mechanise suitable lifting, moving, cutting, digging or finishing tasks.
- Better job matching: choose a tool shaped for the material instead of trying to make a general bucket or forks do every job.
- Local buying support: discuss compatibility, delivery, setup and demonstrations with MultiCat NZ.
How to choose the correct setup
Start with the job, not only the attachment name. Give MultiCat enough information to match the attachment to the machine and working conditions.
- Describe the job: explain the material, approximate size or weight, frequency of use and result you need.
- Confirm the machine: provide the exact MultiCat model so the hitch, hydraulic service and operating limits can be checked.
- Explain the site: include access width, ground conditions, slopes, visibility restrictions and nearby workers or structures.
Before ordering, confirm the attachment dimensions, attachment weight, machine compatibility, hydraulic requirements and applicable operating limits with MultiCat. The machine and attachment manuals remain the final authority.
Safe-use essentials
This article is a buyer guide, not an operating manual. Operators should be trained and follow the current MultiCat machine manual, the attachment manual and site-specific procedures.
- Inspect the attachment, hitch, retaining pins, hoses, couplers, guards and wear parts before work.
- Keep people outside the operating and discharge area.
- Travel at a speed suitable for the surface, visibility, load and attachment.
- Lower and isolate equipment before adjustment, clearing, maintenance or hose work, and manage stored hydraulic energy.
- Stop if the attachment behaves unexpectedly, visibility is inadequate or the job exceeds the confirmed limits.
Frequently asked questions
What can a 35 mm breaker handle?
This attachment is most relevant when the work includes breaking small concrete areas, hard landscaping material and selected rock or post-footing work. The best choice still depends on the material, site access, ground conditions and the LX100 operating limits.
How is carrier flow matched?
Use the machine and attachment documentation as the final authority. Before ordering, ask MultiCat to confirm the attachment dimensions, operating limits, attachment weight and hydraulic requirements, and explain exactly how and where the attachment will be used.
Which tool bit is appropriate?
Start with a trained operator, a pre-start inspection, a correctly secured attachment and a clear exclusion zone. Keep the load or attachment in the approved travel position and follow the current manuals and site risk controls.
Is this the right attachment for your job?
Give MultiCat your machine model, material, site conditions and required result. The team can confirm compatibility and recommend the correct setup.
View the Hydraulic Break Hammer 35mm
